View RSS Feed

All Blog Entries

  1. New freezing plant on H/G trawler *First Visit* Part 2

    Click image for larger version. 

Name:	20150903_152123.jpg 
Views:	3664 
Size:	98.9 KB 
ID:	13871
    Day 2, welding company surging ahead with the suction pipe from liquid separator to compressors
    Click image for larger version. 

Name:	20150901_081213.jpg 
Views:	3501 
Size:	90.6 KB 
ID:	13872
    View from aft for factory, plate freezers on the left. In the picture is our project manager (black t-shirt) and the ships technical consultant (blue jacket). they were discussing the distance between the pillar and the return collector on the plate freezers.
    Click image for larger version. 

Name:	20150901_081227.jpg 
Views:	3450 
Size:	90.3 KB 
ID:	13873
    Same as above

  2. New freezing plant on H/G trawler *First Visit*

    Thought I'd try out the blog feature

    This week I have been in Poland to start the building of a new NH3 freezing plant on a Norwegian trawler that has just been cut in half and lengthened 14 meters.

    The ship was cut just forward of the engine room, and the new piece was put in to make the cargo hold and factory area bigger.

    As it said in the header, it's a H/G trawler (H/G meaning head and guts), so all they do to the fish once it's on board is remove ...
  3. Liquid Floodback at its Finest!

    I first mentioned this story back in the summer of 2013. Since then the problem reoccurred and further measures were taken. This is an updated account from start to finish.

    Click image for larger version. 

Name:	2013-08-08T05-52-12_0.jpg 
Views:	3716 
Size:	95.9 KB 
ID:	11179 Click image for larger version. 

Name:	2013-08-08T05-52-12_1.jpg 
Views:	3820 
Size:	94.6 KB 
ID:	11180

    You're looking at a low stage Mycom compressor liquid-filled all the way up the discharge line! You are probably wondering how something like this can even happen? The story goes like ...
  4. Brazing on an Operating System

    Click image for larger version. 

Name:	2013-02-11T21-45-23_3.jpg 
Views:	2993 
Size:	95.8 KB 
ID:	11099

    It goes without saying that brazing on an operating system is not recommended. Actually,it's highly discouraged!

    Click image for larger version. 

Name:	Leaking King Valve.jpg 
Views:	2940 
Size:	87.2 KB 
ID:	11100

    Unfortunately there are those moments when desperate times call for desperate measures. I was on call and had to travel two hours out of town hoping I had what I needed. I arrived to find a copper liquid line that had been worn through by the clamp that was meant to support
  5. Refrigerant will NOT get you high, it will KILL you!

    Why are people huffing refrigerant? I am a refrigeration technician who works around refrigerants and I have found myself in situations were I have been exposed to higher than recommended limits. I can tell you that the feeling you experience is nothing like the high you get from marijuana. I am seriously concerned for my health at these times! The refrigerants are colourless with a faint sweet odour. Overexposure leads to dizziness and loss of concentration because the vapour displaces
Page 2 of 4 FirstFirst 1234 LastLast