PDA

View Full Version : toshiba fault codes



COOL BOB
27-08-2007, 08:48 PM
:cool: Hi Just found out about this site and wondered if anyone has any info on toshiba a/c fault code
COOLBOB

Karl Hofmann
27-08-2007, 08:51 PM
Yup, got the techie book on DI and SDI kit if that would be of any help..

Latte
27-08-2007, 09:48 PM
I Have a Toshiba fault code list, unfortunatly its fairly old and dont have it on my computer. If you PM me with a phone number i can try and fax it through

Regards

Fatboy

isitfixedyet
31-08-2007, 12:23 AM
make extra sure that the condensing unit and the evap unit match in tonnage, or they wont communicate!

Karl Hofmann
31-08-2007, 12:44 AM
make extra sure that the condensing unit and the evap unit match in tonnage, or they wont communicate!


Ha! I had an issue of a couple of Toshes not communicating properly.. Both would start up ok but after a while the slave unit would shut down and not run again untill I switched the system off and then on again (No apparent reason).. I threatend it with the same monkey wrench that I beat the crap out of an LG unit with... They seem to be working fine now....NOW THAT'S communication :D

By the way isitfixedyet, why is that girl showing you her contact lens?? Just curious :D

Brian_UK
31-08-2007, 09:33 PM
Also try the Toshiba websites or even better try AMP here

http://www.ampair.co.uk/AMP%20Air%20Conditioning%20Document%20Downloads.htm

Click on the Technical Handboook Version 10; it has the fault codes for RAS, RAV and upwards.

superswill
01-09-2007, 07:33 PM
http://www.dolphin-airco.be/documentatie.html

i find very helpfull

paul

Hodgo
09-12-2007, 08:18 AM
Thankyou... Very helpful.
Regards,