aza
03-07-2007, 10:47 PM
Hello, has anyone had this experiance.
A Unico System with a Highcool Heat pump.
Problem! All wires from hard wired control panel via unico unit disconnected at outdoor unit, so, no communication from indoor to outdoor so it should be switched off.
But, outdoor continues to run???? from approx. 42psi on Suction side until the pressure drops to approx 17psi then the compressor cuts out pressure slowly rises, compressor starts.
This continues none stop.
Has anyone experianced anything like this??????
A Unico System with a Highcool Heat pump.
Problem! All wires from hard wired control panel via unico unit disconnected at outdoor unit, so, no communication from indoor to outdoor so it should be switched off.
But, outdoor continues to run???? from approx. 42psi on Suction side until the pressure drops to approx 17psi then the compressor cuts out pressure slowly rises, compressor starts.
This continues none stop.
Has anyone experianced anything like this??????