gdidi
27-06-2007, 11:48 AM
Dear RE Members.
I am absolutely new to the in-depth workings of refrigeration systems. I understand the basic principles.and have some experience in the electrical control of HVAC systems.
I am considering the possibility of using my Mitsubishi heatpump to heat (Pre-Heat) my domestic hot water.
I have a 16KW (heating multisplit) unit
Model MXZ-8A140VA
REFRIGERANT R410A
The cylinder I have has a stainless steel coil inside the tank.
The coil has a surface area of 1,1M2(Square meter)
Diameter of 20mm
I think this has a KW Rating of more or less 32KW
My Question is:
If I were to turn all other circuits OFF and dedicate the total capacity (16KW) to this coil will it work as a water heater?
What possible problems could I face
Once I receive some answers/suggestions I will ask a few more questions.
Thanks for your reply in advance.
I am absolutely new to the in-depth workings of refrigeration systems. I understand the basic principles.and have some experience in the electrical control of HVAC systems.
I am considering the possibility of using my Mitsubishi heatpump to heat (Pre-Heat) my domestic hot water.
I have a 16KW (heating multisplit) unit
Model MXZ-8A140VA
REFRIGERANT R410A
The cylinder I have has a stainless steel coil inside the tank.
The coil has a surface area of 1,1M2(Square meter)
Diameter of 20mm
I think this has a KW Rating of more or less 32KW
My Question is:
If I were to turn all other circuits OFF and dedicate the total capacity (16KW) to this coil will it work as a water heater?
What possible problems could I face
Once I receive some answers/suggestions I will ask a few more questions.
Thanks for your reply in advance.