Lc_shi
26-12-2006, 06:53 AM
Hi sirs
We made 100Kw below capacity chiller with evaporative condenser \ scroll compressor and plate HX evaporator. The COP is near 4.0. It's for many years but there is not many customers to use it.
The problem i proposed is as follows:
1) Cost is higher than air-cooled chiller
2)no heating mode due to the evaporative condenser limited;
3) service needed at annually start up
4) capacity is small leading to obvious advantage of energy saving
I hope to improve this product to get more sales. Eagerly need your advice! thanks in advance
regards
LC
We made 100Kw below capacity chiller with evaporative condenser \ scroll compressor and plate HX evaporator. The COP is near 4.0. It's for many years but there is not many customers to use it.
The problem i proposed is as follows:
1) Cost is higher than air-cooled chiller
2)no heating mode due to the evaporative condenser limited;
3) service needed at annually start up
4) capacity is small leading to obvious advantage of energy saving
I hope to improve this product to get more sales. Eagerly need your advice! thanks in advance
regards
LC