PDA

View Full Version : Daikin I touch controller (1st generation)



Airconkid
05-04-2023, 09:34 PM
Looking for some info please guys if you can help.

I have a Daikin 5MKS90E2V3B multi outdoor connected to an I touch centralised controller.

I’ve never seen this setup on on multi like this before and due to limited access at present I can’t see exactly how it’s been wired.

I have checked the install manual and can’t see any connections at the outdoor to allow an I touch to be wired.

Can any one expand on the wiring/setup of the above please?

Peter_1
06-04-2023, 10:15 AM
It's connected to the bus, 2 wires
You can pick up the signal everywhere along the bus