New Condenser Fin Damage

[henrygrego]

Hello,
I recently got a new split system installed. I noticed on the back of the condenser, there seems to be a few fins quite bent.
The installer did not mention anything about this and the a/c is working very well so far.
Is this something I should be worried about? I appreciate the fins are easily bendable and it could have easily happened during transit or even install.

Thanks in advance :cool:

https://i.postimg.cc/B6SfBhZs/Fins1.png
https://i.postimg.cc/vB0FqWDn/Fins2.png

[NH3LVR]

Not that bad. Probably will not cause any trouble. The Installer can fix it or you can go to Amazon and search for "Fin Comb".

[henrygrego]

Not that bad. Probably will not cause any trouble. The Installer can fix it or you can go to Amazon and search for "Fin Comb".

Thanks for your post. I might ask the installer to take a look next year when they service it. I don’t want to damage anything having a go with the comb, I did try with a brush I have and it didn’t make much of a difference. I have a year of warranty with the installer, so if I get them back just before the year is out, they can take a look and hopefully fix it.