IlyaE
15-01-2022, 06:13 PM
Hello, I have an ARY24LUAN internal) / AOY24LMAKL reversible ducted system installed, and I wnated to be able to switch it remotely (via the internet) with a simple on/off control.
The system has a wired remote control, but I cannot change the function 46 (External input control) to forced stop. In the default mode (operation/stop), the remote controller overrides my external switch input, even if I have previously switched the system off remotely, when there is a heat/cool demand.
So I can force the system to stay off most of the time by "pulsing" the remote switch off-on-off every hour, but I am sure that this is not what the engineers intended.
I can go into the options menu on the remota nd change option 46 to "02" but this has no effect.
Does anyone know what I am doing wrong?
Thanks very much for your help
Ilya
The system has a wired remote control, but I cannot change the function 46 (External input control) to forced stop. In the default mode (operation/stop), the remote controller overrides my external switch input, even if I have previously switched the system off remotely, when there is a heat/cool demand.
So I can force the system to stay off most of the time by "pulsing" the remote switch off-on-off every hour, but I am sure that this is not what the engineers intended.
I can go into the options menu on the remota nd change option 46 to "02" but this has no effect.
Does anyone know what I am doing wrong?
Thanks very much for your help
Ilya