York chiller heating will not start

[csrbv]

Hello
I have a York YVAG012RSE30 new.
There is water on the system, de air is out the system.
When i plug it in, 230V, i get EE on the display.
A timer on the print count 160 seconds, after that nothing happens.
EE stays.
Somebody familiar with this?
Greetings Fernando.

[Brian_UK]

EE error code is for a water level fault.

[csrbv]

I just have found the problem.
There are dip switch inside the remote. 4-5-6 has to be ON.
Nothing is written on the manuel. The manual from York is incomplete.

[csrbv]

Problem was the dip switch from the remote controlle.
Some has to be in the ON position, depends from what sort of installation.