CoolKiwi
18-10-2020, 03:41 AM
I have a glycol cooler for beer lines. It's had additional taps added over the years. System has a 15.2cc compressor, @-12deg C system has around 800w performance.
Tank temp should be -4C.
The 4.2m of 1/2 tube seems too short. -no load on system. I intend to double what's there, but some idea on ballpark numbers would be helpful.
What I want to calculate is the kw /meter for different tube sizes.
Eg: 3/8 does 50w/mtr at -12 1/2 does 80w/m etc etc.
Can anyone advise on either "quick cheat sheets" or calculations for working this out?
Tank temp should be -4C.
The 4.2m of 1/2 tube seems too short. -no load on system. I intend to double what's there, but some idea on ballpark numbers would be helpful.
What I want to calculate is the kw /meter for different tube sizes.
Eg: 3/8 does 50w/mtr at -12 1/2 does 80w/m etc etc.
Can anyone advise on either "quick cheat sheets" or calculations for working this out?