View Full Version : Urgently need to replace broken hose Duct for Matsui MPA7KWR
Hmpto
22-08-2020, 09:24 PM
hi, I don't have the manual, matsui parts don't exist anymore. I can't find out anywhere on the internet what size the duct is to replace it.
I measured diameter by myself, but it shows 3.8-4.2" because the hose edges zig-zag in size, like an accordion.
My hose has torn in the middle.
Does anybody know what size and where I can replace it urgently?
Brian_UK
23-08-2020, 12:20 AM
Try Amazon, they have various sizes available.
nike123
23-08-2020, 10:31 AM
https://www.decinternational.com/uk/products.html
https://www.decinternational.com/uk/semidec.html
fi100mm
Rob White
23-08-2020, 10:38 AM
.
I put that make and number in Google and came up with a manual and a selection of hoses for less than £20.
Rob
Rob White
23-08-2020, 10:40 AM
.
https://www.ebay.co.uk/i/233680233400?chn=ps&norover=1&mkevt=1&mkrid=710-153316-527457-8&mkcid=2&itemid=233680233400&targetid=4584757333656279&device=t&mktype=&googleloc=&poi=&campaignid=398226931&mkgroupid=1298523467304035&rlsatarget=pla-4584757333656279&abcId=2145997&merchantid=87779&msclkid=b80db17c838e197f182cee3ebbe08540
.
Brian_UK
23-08-2020, 02:26 PM
So did I Rob, sadly no response yet from OP.
Hmpto
23-08-2020, 03:34 PM
Thanks for the replies.
.
I put that make and number in Google and came up with a manual and a selection of hoses for less than £20.
Rob
Oops, I must have searched in google.com. Now I searched google uk saw and read the currys manual. But still can't find the hose size required.
How did you find the hose size for that model?
Brian_UK
23-08-2020, 07:52 PM
Your hose size will be 4" according to the measurements that you have taken.
Assortment here from Amazon.....
https://www.amazon.co.uk/s?k=Flexible+air+hose+4%22&ref=nb_sb_noss_2
Hmpto
23-08-2020, 09:24 PM
I'd like to make sure of the size, required, because my measurement as a range not a fixed number.
Also, the baggy ones will tear. I need a semi-flexible plastic one like the original.
Brian_UK
23-08-2020, 09:56 PM
Well measure the size of the fitting that the hose goes into.
There are only so many sizes, the manufacturer's are unlikely to waste money going for a non-standard size.
Hmpto
24-08-2020, 02:34 AM
Well measure the size of the fitting that the hose goes into.
There are only so many sizes, the manufacturer's are unlikely to waste money going for a non-standard size.
Thanks!
I measured the connector to be 4.8" and luckily found & ordered the 4.7" https://www.amazon.co.uk/Aluminium-Flexible-Length-Ventilation-Ducting/dp/B07ZXDD5DZ/ref=sr_1_6?dchild=1&keywords=ventilation+hose+120mm&qid=1598232785&sr=8-6
Hmpto
27-08-2020, 07:51 PM
Thanks!
I measured the connector to be 4.8" and luckily found & ordered the 4.7" https://www.amazon.co.uk/Aluminium-Flexible-Length-Ventilation-Ducting/dp/B07ZXDD5DZ/ref=sr_1_6?dchild=1&keywords=ventilation+hose+120mm&qid=1598232785&sr=8-6
The amazon one was made of foil and broke as soon as I opened it.
Does anyone know where I can buy a 1-2metre long 4.6" diameter semi-flexible and durable hose?
Brian_UK
28-08-2020, 12:12 AM
Try tumble drier spares perhaps.
Hmpto
29-08-2020, 12:56 AM
Try tumble drier spares perhaps.
Can't find it under that keyword either. Damn do i really ned to replacde a working aircon unit just becazuse of a stupid sized hose
chemi-cool
29-08-2020, 11:19 AM
Have you thought of using duct tape to fix it?
frank
29-08-2020, 11:43 AM
Just buy the 5" and tighten it up with a worm drive clip.
Hmpto
29-08-2020, 02:28 PM
The factory hose is a semi-flexible, so every time I contort and accordion it, the tape will come off, because a whole line has torn at two ends.
Hmpto
29-08-2020, 02:29 PM
Just buy the 5" and tighten it up with a worm drive clip.
Will a semi-flexible hose shrink wiht the clip, or will the tension be too high to maintain at the 2 factory end parts?
Brian_UK
29-08-2020, 06:56 PM
Click here.
https://bfy.tw/Ougn
You even get joining tape.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.