Polar t316 main circuit board.

[Lukenelson]

Hi there,

Stupidly I’ve bought a new board for this machine and not taken a picture of what goes back where. After hours on the Internet I cannot for the life of me find anything to help me out on how to install everything correctly. The board I got was an AA234. Basically looking for a colour set up guide if possible? Many thanks

[frank]

can't help with the wiring diagram but there is a UK telephone helpline number on page 51 of the user manual
https://media.nisbets.com/asset/en/media/user%20manual%20t316%20gl192.pdf

[charlie patt]

Good luck with nisbets useless unless buying new most of the plugs have different pins so cannot be crossed over the only ones that can be is bin and ice sensor but these are marked in the board as bin and ice if you have a 3 pin plug fit it to the 3 pins on the board the bin motor is also marked up