derekj
16-06-2006, 12:10 AM
Hi, I'm new to this and need some help with what will seem like very basic questions to you guys in regard to plit wall mounted inverter heat pumps.
The outdoor unit seems relatively quiet but the noise from it is muchy louder inside. Noise seems to be not only transferring through the pipework to the indoor unit but also the house framing seems to be carrying it.
Everything seems well insulated and fixed etc.
The noise is okay until the compressor is at it highest load/speed.
What are the possible causes and solutions and what should I be looking for?
Hope you will help as I am unable to get much help from my associates. (Its a long story :()
Thanks...Derek
The outdoor unit seems relatively quiet but the noise from it is muchy louder inside. Noise seems to be not only transferring through the pipework to the indoor unit but also the house framing seems to be carrying it.
Everything seems well insulated and fixed etc.
The noise is okay until the compressor is at it highest load/speed.
What are the possible causes and solutions and what should I be looking for?
Hope you will help as I am unable to get much help from my associates. (Its a long story :()
Thanks...Derek