Daikin EkEQFCBAV

[ballvalve]

I have a daikin AHU with a EkEQFCBAV running off a vrf if.
Everything is operational but I now need the ahu to take control on a 0 to 10v . I can not remember the field setting code for the ahu to now take control so I can disconnect the remote after commissioning

Mode setting 23 is set for x control.

Any help.
Thanks

[TrickyRikki]

I have a daikin AHU with a EkEQFCBAV running off a vrf if.
Everything is operational but I now need the ahu to take control on a 0 to 10v . I can not remember the field setting code for the ahu to now take control so I can disconnect the remote after commissioning

Mode setting 23 is set for x control.

Any help.
Thanks

Not sure if it will help you but there is settings ect in the installation manual

https://my.daikin.eu/dam/document-library/declaration-of-conformity/vent/air-handling-application/ekeq/EKEQ_EKEXV_IOM_4PEN383212-1_Installation%20manuals_English.pdf