ballvalve
22-11-2019, 05:38 PM
I have a daikin AHU with a EkEQFCBAV running off a vrf if.
Everything is operational but I now need the ahu to take control on a 0 to 10v . I can not remember the field setting code for the ahu to now take control so I can disconnect the remote after commissioning
Mode setting 23 is set for x control.
Any help.
Thanks
Everything is operational but I now need the ahu to take control on a 0 to 10v . I can not remember the field setting code for the ahu to now take control so I can disconnect the remote after commissioning
Mode setting 23 is set for x control.
Any help.
Thanks