chillyblue
09-08-2019, 05:26 PM
Hi
I have a nice ice model N52L icemaker with the red fault light flashing, the manual says it's the condenser temperature sensor failed / not connected, i measured the resistance of the sensor and it was about 6kohms at 13 deg C, the bin sensor was the same, so i swapped them over and still have the same fault.
any ideas on what could be wrong or where i can get technical help / spares from would be helpful
Regards
CB
I have a nice ice model N52L icemaker with the red fault light flashing, the manual says it's the condenser temperature sensor failed / not connected, i measured the resistance of the sensor and it was about 6kohms at 13 deg C, the bin sensor was the same, so i swapped them over and still have the same fault.
any ideas on what could be wrong or where i can get technical help / spares from would be helpful
Regards
CB