View Full Version : Mycom 200sud-me
FMTEAM
04-07-2019, 01:49 PM
Hi there,
I need documentation and spare part list for Mycom screw compressor, model 200SUD-ME.
Thanks in advance for help.
BR
RANGER1
04-07-2019, 07:22 PM
Try these links
http://www.bowmanrefrigeration.com/uploads/pdf/ud-u-ug_series_prices.compressed.pdf
http://www.bowmanrefrigeration.com/uploads/pdf/v_series_manual.compressed.pdf
https://www.hosbv.com/data/specifications/5385%20-%20Mycom%20250%20VSD.pdf
screw overhaul manual not exactly the same, but thrust bearings etc the same
mre212
08-07-2019, 11:45 PM
can you send me preventive maintenance manual for 200VLD
RANGER1
09-07-2019, 07:49 PM
can you send me preventive maintenance manual for 200VLD
Don’t know of preventative maintenance manual, only overhaul manual.
Your email address was rejected at yahoo.
What do you need exactly, what are you trying to do?
mre212
24-09-2019, 10:27 PM
thank you RANGER1 for your continuous support i hope this post finds you well
please my MYCOM screw compressor 200VLD reach 50000 running hours and i would like to know the maintenance that i should apply in this time
thank you
RANGER1
25-09-2019, 01:07 AM
thank you RANGER1 for your continuous support i hope this post finds you well
please my MYCOM screw compressor 200VLD reach 50000 running hours and i would like to know the maintenance that i should apply in this time
thank you
http://www.mayekawamma.com/pdf/SCV_IM20150612E%20tornillo.pdf
mre212 in manual 5.6 to 5.9 is a fair indication of what needs to be replaced.
Your machine may not have Variable Vi in which case a guide block & pin may need inspection.
In general 50,000hrs would always replace following.
Gasket & “0” ring kit
shaft seal assembly
thrust bearings
locknut & washer kit
main & side bearings
balance piston & sleeve
guide block & pin
indicator “V” ring seal
unload piston cap seal
machine then good for another 30 t0 40,000 hours.
Will find in’s a better document in next few days
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.