View Full Version : Danfoss ICFE 20 polymer seat
RANGER1
08-04-2019, 08:33 AM
If anyone can help, Interested in torque value for polymer seat.
Not in instructions with valve kit.
Thanks
frank
08-04-2019, 11:44 AM
Hi Ranger
I found this instruction leaflet which includes torque settings http://files.danfoss.com/TechnicalInfo/Dila/01/PIFT0C402_ICF.pdf
RANGER1
08-04-2019, 08:59 PM
Thanks Frank,
Unfortunately cannot find the torque setting for ICFE 20 item 6 on page 7.
Frustrating as lots of instructions, but not there.
Apparently you have to break a seat to find out that they are not much more than finger tight, otherwise snap off.
Thanks again
RANGER1
29-04-2019, 08:36 PM
2nm apparently!!
frank
29-04-2019, 08:39 PM
Finger tight might just be a touch too much😁
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.