View Full Version : MyPro with BAS
xixxi
31-10-2018, 05:49 PM
Hi everyone!
I am just curious, how you connect MyPro CP1A to the BAS MicroNet MNL 800-101 with a LON connection?
Thanks!
HVACRsaurus
01-11-2018, 01:57 AM
Howdy,
Page 99
Then page 103 onward
https://www.mayekawausa.com/pdf/tech_data/CP1A_manual.pdf
Happy tinkering!
xixxi
01-11-2018, 12:05 PM
Howdy,
Page 99
Then page 103 onward
https://www.mayekawausa.com/pdf/tech_data/CP1A_manual.pdf
Happy tinkering!
Oh, thanks!
Does it mean, the communication board should be installed and wired with BSA by gateway (to convert Modbus to LON)?
Thanks!
Rob White
01-11-2018, 07:05 PM
.
Are you guys speaking English?
Or a version of Swahili and Martian??
:D
Rob
.
HVACRsaurus
01-11-2018, 11:13 PM
Oh, thanks!
Does it mean, the communication board should be installed and wired with BSA by gateway (to convert Modbus to LON)?
Thanks!
Hey,
The Mypro talks with RS-485
Mostly at your computer you will want 232 or Ethernet or USB
Just Google “rs-485 converter”
There are many choices & not all are expensive
Enjoy
Ps, whilst you could probably use Lon, again it’s just another conversion - there are likely several ways to pull the data
Something like this;
15300
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.