Dunham bush compressor info

[danod]

Looking for rotor specs and dimensions for a Dunham Bush LSC 204 and LSC 255 A, B, C and D models. Have a 204 LSC pulled apart and the rotors have tagged the casing.
Would be nice to have proper assembly instructions if the customer wants it rebuilt.
This compressor is on a FES package. FES model 255

[RANGER1]

Danod,
Have a manual & sizes of journals/bearings.
At the end of the day 0.004" to 0.005" rotor journal clearance & discharge end clearance.
The LSC has a few variants, one being pressed in line bored white metal bearings, the other field replaceable
white metal bearings which need no machining (which is best).
Hartford compressors have had a lot of owners in the last 10 years, the latest a Chinese major share holder.
If you were to buy parts off someone, maybe they can help out a bit as well.
Got any pictures?
How old are they?

https://www.dbamericas.com/hartford_compressors.php

[danod]

sorry for the late reply. we pulled it apart to find the rotor has tagged the casing. enough damage to warrant searching for a replacement or installing a different brand and making piping changes. it is a machine that requires machining of bearings when installed. not sure of the age, we did order and receive parts. it is a FES package. FES model 255 X-6830 (not sure what the x number is)

[RANGER1]

sorry for the late reply. we pulled it apart to find the rotor has tagged the casing. enough damage to warrant searching for a replacement or installing a different brand and making piping changes. it is a machine that requires machining of bearings when installed. not sure of the age, we did order and receive parts. it is a FES package. FES model 255 X-6830 (not sure what the x number is)

Go for a Mycom, measure length of rotor to give same size, also check motor HP.
It would be a 250 V series compressor.
Has been done before.
I also thought you could get a new DB bare shaft machine?