rahal123
07-08-2018, 10:33 PM
Hi everyone,
i was looking for service manual for this unit aqv12ewcn and i didn't get anything.
the outside unit work for 30 sec and turn off , also the red light is blinking.
i have checked most of the component of the PCB but i found fault resistor R105 6.8k near (coil) called PT (sensor as i think ) and i replace it , the shunt resistor is working probably (its give me short circuit and 0.01 ohm).
But i suspect the capacitors (there is no visual explode or any damage ) how should i test them ?
please advise
i was looking for service manual for this unit aqv12ewcn and i didn't get anything.
the outside unit work for 30 sec and turn off , also the red light is blinking.
i have checked most of the component of the PCB but i found fault resistor R105 6.8k near (coil) called PT (sensor as i think ) and i replace it , the shunt resistor is working probably (its give me short circuit and 0.01 ohm).
But i suspect the capacitors (there is no visual explode or any damage ) how should i test them ?
please advise