back2space
03-07-2018, 02:04 PM
Afternoon,
We have the above unit in our office at work, I notice that there is a blue thermister sensor in the air outlet. Possibly the evaporator sensor. Is this in the correct place or is there a place it should be? See attached picture...
15256
Just wondering the logic for putting it here, as usually they are mounted on the pipework in a little slot the same as the pipe temp sensor?
Is it better for it to be in this position to read the air off?
According to https://planetaklimata.com.ua/instr/...Manual_Eng.pdf (https://planetaklimata.com.ua/instr/Mitsubishi_Electric/Mitsubishi_Electric_PKA-RP_HAL_Service_Manual_Eng.pdf) there is just the 3 sensors, evap, pipe & return air sensor.
Unit is working properly but wondered if this is in the right place. The air off is nice and cold.
Thank you.
Richard.
We have the above unit in our office at work, I notice that there is a blue thermister sensor in the air outlet. Possibly the evaporator sensor. Is this in the correct place or is there a place it should be? See attached picture...
15256
Just wondering the logic for putting it here, as usually they are mounted on the pipework in a little slot the same as the pipe temp sensor?
Is it better for it to be in this position to read the air off?
According to https://planetaklimata.com.ua/instr/...Manual_Eng.pdf (https://planetaklimata.com.ua/instr/Mitsubishi_Electric/Mitsubishi_Electric_PKA-RP_HAL_Service_Manual_Eng.pdf) there is just the 3 sensors, evap, pipe & return air sensor.
Unit is working properly but wondered if this is in the right place. The air off is nice and cold.
Thank you.
Richard.