Ciat "Aqua Ciat LDC with a Connect Controller

[Grizzly]

Hi Guys
Can anyone advise.
I have one of the above locked out on Fan Fault.

However when the fan contactors (2) are pushed in either fan runs.

I have pressed the reset, but the fan fault remains.

Help.
Grizzly

[redroge]

Do you need to reset it on the controller !

[Brian_UK]

According yo the manual it should reset automatically when the input is closed. (??)

Page 53 of manual...
https://www.google.co.uk/url?sa=t&source=web&rct=j&url=http://www.ciat.uk.com/wp-content/uploads/2017/02/Connect-2-control.pdf&ved=2ahUKEwj7v8qou57ZAhUQr6QKHRUkAoAQFjABegQIEBAB&usg=AOvVaw2z5zQ274n47hh1xG_7fdje

[Grizzly]

Yes and yes Guys!
I tried pressing the reset But the fault did not clear!
I read the same Brian. As to what the input refers to I do not know?
I am assuming it needs to be reset within the software somehow?
But so far I am at a loss.
Cheers Grizzly

[Grizzly]

I also tried the "Three Pin Reboot" that did not work either.
Grizzly

[Brian_UK]

You must need one of those "big effing hammers".

[Grizzly]

Hi Brian.
No a resurrection Kit :D its on a hospital site.

[Gibbo]

Hi Grizzly.
It's possible that the fans are linked together via a fan internal thermostat connection across all fans all of which needs to make before any fans will run. Just a thought.

[r.bartlett]

Hi Guys
Can anyone advise.
I have one of the above locked out on Fan Fault.

However when the fan contactors (2) are pushed in either fan runs.

I have pressed the reset, but the fan fault remains.

Help.
Grizzly

how does the controller 'know' there is a fan fault? o/l or thermistor etc

[Grizzly]

good points RB.
I am back tomorrow to try and identify what's happening.
Has anyone had similar?
Grizzly

[redroge]

I've had what Gibbo says but. Not on a ciat good luck