beebarron
16-01-2018, 10:27 AM
I had an issue with a faulty solenoid coil on a CMB P1010V E BC box, where the coil was knackered and had melted on to the valve spindle.
While gently (honestly) trying to prize the coil off the whole spindle sheared off :( - luckily I sort of thought this might happen so had pumped down the unit as a precaution.
So only dumped a bit of gas on to my head :(
The valve bodies are available as spares - phew and seem to be removable, but need a 2 pin tool to remove.
Mitz don't stock them Any idea where I might get one?
While gently (honestly) trying to prize the coil off the whole spindle sheared off :( - luckily I sort of thought this might happen so had pumped down the unit as a precaution.
So only dumped a bit of gas on to my head :(
The valve bodies are available as spares - phew and seem to be removable, but need a 2 pin tool to remove.
Mitz don't stock them Any idea where I might get one?