vikky1971
27-09-2017, 03:44 PM
Dear all,
In my absence my Air con(1Ton)was serviced, after four months when I opened the indoor unit, found that the motor-impeller coupling bolt head has broken. I sprayed WD-40 to ease it up but no use. Due to this hurdle the vanes of the impeller can't be cleaned properly. Can someone give a practical solution to this?
In my absence my Air con(1Ton)was serviced, after four months when I opened the indoor unit, found that the motor-impeller coupling bolt head has broken. I sprayed WD-40 to ease it up but no use. Due to this hurdle the vanes of the impeller can't be cleaned properly. Can someone give a practical solution to this?