1jupilersvp
24-11-2016, 09:04 PM
Hello all,
I have a question regarding SANYO control panel and outdoor unit :
During normal operation for heating, the outdoor unit has 2 or 3 different 'speed' of compressor/fans.
Is it possible to force the outdoor unit to the low 'speed' ? Via a parameter set on the control panel ?
I measured the current of the outdoor unit, and I had a first step at 8A, after some minutes, it switch to 13A and then max measured at 18A.
For several reasons, I would like to limit the current at 8A.
Thanks for your help.
Manu.
I have a question regarding SANYO control panel and outdoor unit :
During normal operation for heating, the outdoor unit has 2 or 3 different 'speed' of compressor/fans.
Is it possible to force the outdoor unit to the low 'speed' ? Via a parameter set on the control panel ?
I measured the current of the outdoor unit, and I had a first step at 8A, after some minutes, it switch to 13A and then max measured at 18A.
For several reasons, I would like to limit the current at 8A.
Thanks for your help.
Manu.