View Full Version : Titanium Flat Plate Heat Exchangers
TBFTL
10-05-2006, 01:53 PM
Need a bit of help if possible.
I'm trying to find manufacturers of the above type of heat exchanger.
I know Tranter manufactuer a plate coil but does anyone else.
It needs to be Titanium because it is a sea water application.
Cheers
US Iceman
10-05-2006, 03:15 PM
Here are some links for your review:
http://www.alfalaval.com/ecoreJava/WebObjects/ecoreJava.woa/wa/showNode?siteNodeID=7581&contentID=37114&languageID=1
http://www.apv.com/us/eng/products/heatexchangers/singleplate/Plate+Heat+Exchangers+-+gasketted.htm
http://www.muel.com/products/heattransfer/plate/marineApplications.cfm
http://www.flatplate.com/index.htm
bruceboldy
16-05-2006, 12:07 AM
MY old company is one of the best with titanium and sea water applications they also use a non titanium material that is less expensive .
Contact Zahid Ayub @ Isotherm in the USA
I think he likes to use isoflx1@aol.com
Peter_1
16-05-2006, 06:28 AM
Swep, AIA in Sweden,
PEPELEBU
15-06-2006, 05:39 PM
I agree you should contact the guys at ISO-THERM.
www.iso-therm.com (http://www.iso-therm.com) :)
Roar Ellefsen
10-09-2006, 04:54 AM
Teknotherm Inc. manufacture shell and tube flooded heatexchangers with titanium tubes, stainless 316L tube sheets and stainless bwater boxes. Teknotherm also make DX- shell and tube with titanium tubes, stainless tube sheets and stainless shell.
Regards
Roar Ellefsen
Need a bit of help if possible.
I'm trying to find manufacturers of the above type of heat exchanger.
I know Tranter manufactuer a plate coil but does anyone else.
It needs to be Titanium because it is a sea water application.
Cheers
Roar Ellefsen
10-09-2006, 05:02 AM
Teknotherm Inc. manufacture shell and tube flooded heatexchangers with titanium tubes, stainless 316L tube sheets and stainless bwater boxes. Teknotherm also make DX- shell and tube with titanium tubes, stainless tube sheets and stainless shell.
Regards
Roar Ellefsen
Need a bit of help if possible.
I'm trying to find manufacturers of the above type of heat exchanger.
I know Tranter manufactuer a plate coil but does anyone else.
It needs to be Titanium because it is a sea water application.
Cheers
winfred.dela
10-09-2006, 08:38 AM
Hope you could have one immediately.
My supplier Alfa Laval Phils. needs lead time of up to 6 months for Titanium Plate Heat Exchangers.
A lot of my customer use it for boat refrigeration, Evaporators as well as Condensers.
Also, thre are no small ones for a PHE with titanium plates.
What capacity do yo need?
What refrigerant do you intend to use?
NoNickName
10-09-2006, 10:47 AM
I confirm alva laval is having 6 months delivery time on these goods
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.