jonesy_87_
13-05-2016, 02:52 AM
Hi all,
I have a system with a master and 2 slaves.
When the system faults it comes up as an abnormality on the master PCB (H2P and H3P)
My question. Is there a way to find which condenser is producing the fault rather than checking each condenser.
Dakin tech support told me that despite the master displaying the fault, the fault itself could be on the slave. I asked him if there was a way to test which condenser without checking them all indivually and he told me there wasn't and I'd have to check all PCB on all condensers.
I feel like there should be an easier way - Would coding out condensers 1 by 1 until the fault disappeared work?
Cheers for any input
I have a system with a master and 2 slaves.
When the system faults it comes up as an abnormality on the master PCB (H2P and H3P)
My question. Is there a way to find which condenser is producing the fault rather than checking each condenser.
Dakin tech support told me that despite the master displaying the fault, the fault itself could be on the slave. I asked him if there was a way to test which condenser without checking them all indivually and he told me there wasn't and I'd have to check all PCB on all condensers.
I feel like there should be an easier way - Would coding out condensers 1 by 1 until the fault disappeared work?
Cheers for any input