anil130
28-07-2015, 02:44 AM
i need some help from you guys regarding some electrical issues on our VRF system.
all together i have eight floor and on each floor i have different system.and below
is the total estimated load for eight floor.
1.TOTAL ELECTRICAL POWER INPUT 1Ph (kW) = 72.37 KW
2.TOTAL ELECTRICAL POWER INPUT 3Ph (kW) = 126.76 KW
..................................................................
TOTAL ELECTRICAL LOAD (kW) = 199.13 KW
now, my question is, how to calculate energy consumption on this situation
so that client reduces the estimate cost.it is not possible to run all the system
at time in Nepal.what i think is to get this load our all system must be run on
full load.is it possible if i say reduces the total load up to 80%, if i say this then
will i be safe? and will you please guide me on this situation how our system (Mitsubishi electric VRF ) saves the electrical consumption.i will be highly obliged if you kindly guide me.
waiting for your kind and warm reply.
all together i have eight floor and on each floor i have different system.and below
is the total estimated load for eight floor.
1.TOTAL ELECTRICAL POWER INPUT 1Ph (kW) = 72.37 KW
2.TOTAL ELECTRICAL POWER INPUT 3Ph (kW) = 126.76 KW
..................................................................
TOTAL ELECTRICAL LOAD (kW) = 199.13 KW
now, my question is, how to calculate energy consumption on this situation
so that client reduces the estimate cost.it is not possible to run all the system
at time in Nepal.what i think is to get this load our all system must be run on
full load.is it possible if i say reduces the total load up to 80%, if i say this then
will i be safe? and will you please guide me on this situation how our system (Mitsubishi electric VRF ) saves the electrical consumption.i will be highly obliged if you kindly guide me.
waiting for your kind and warm reply.