Unisab II Issue

[ChiefJones]

Problem Solved!

[Grizzly]

Hi Chief.
You Don't mention what you did?

Would that be selecting the Remote control option by any chance?

If I remember earlier you were talking about Manual and Auto modes, neither of which would set the comps to talk to each other!
Grizzly

[Tycho]

Hi ChiefJones :) Welcome to RE :)

I didn't get to read the initial question, but going by Grizzlys response it had something to do with unisabs communicating, so for the benefit of future readers:

they have to be set to "control" to talk to each other.

Auto - local auto, the unisab regulates it's own compressor

manual - well... manual


And a small rant at the end :)

RE is about sharing, learning and educating so when you edit your post to say "problem solved", and remove your initial question and don't post the solution to your problem then there is nothing for a future member to learn if he is having the same problem that you had ;)
Just a rant, no hard feelings :D

[Josip]

Hi, ChiefJones :)

welcome to RE forums ...


Problem Solved!

nice, but what was your problem :confused:

I agree with Tycho ....
Best regards, Josip :)