FreezeAir3
20-10-2014, 12:32 PM
Recently converted R-22 to 407C on a McQuay rooftop unit that has 4 Copeland semi-hermetics. System has been operating good all summer but recently noticed on all compressors bottom oil plate gaskets are all weeping oil with proper torque settings .System does have POE oil installed in it with original gaskets from when R-22 was in operation.
Looking for information on correcting problem or has anybody experienced similar problems due to converting R-22 to 407 C.
Thanks.
Looking for information on correcting problem or has anybody experienced similar problems due to converting R-22 to 407 C.
Thanks.