View Full Version : dixell xr06 controller
mattym
13-08-2014, 08:43 PM
Eveining all im wondering if there is a way of accessing the coil probe on this type on controller i looked at 1 briefly today and it was iced up defrosted it and let it come back on i noticed though the evap fan would run for a minute the switch off as if short of gas but i couldnt access the 2nd peobe to check coil temp i have the paperwork but im goimg back to it tomorrow to check everything thamks
install monkey
13-08-2014, 09:18 PM
fan start parameter, if the cab is warm, evap fan will cycle on/off till it gets to grips with the load- when the cab is at temp the fan will operate in a more stable manner
install monkey
13-08-2014, 09:20 PM
http://www.weissinstruments.com/dixell/pdf/XR06CX.pdf
mattym
13-08-2014, 10:05 PM
Thanks install monkey i noticed the ice was formed right around the drip tray of the evap but there is one of those heater mats on the drip yray so i wonder if it failed any body else got advice its not exactly a reputable cabinet name either
cadwaladr
14-08-2014, 07:49 PM
Don't like dixell,,eliwell every time for me!
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.