G Cook
04-05-2014, 09:38 PM
Hi all,
I was asked to look at one of these - Leisure HJA6100 Error code E4 was being displayed which is defrost heater fault. Evaporator was iced up. Once ice had melted I returned to check it, found a circuit through the defrost heater, gave it an independent supply and it heated. Let the cabinet run and checked the termination stat attached to the evap, no circuit through it. I was thinking this was the fault, ordered part and returned to fit, fitted it to find e4 still being displayed!!
Any ideas??
(I brought the old termination stat away and checked it again - it is faulty!)
I was asked to look at one of these - Leisure HJA6100 Error code E4 was being displayed which is defrost heater fault. Evaporator was iced up. Once ice had melted I returned to check it, found a circuit through the defrost heater, gave it an independent supply and it heated. Let the cabinet run and checked the termination stat attached to the evap, no circuit through it. I was thinking this was the fault, ordered part and returned to fit, fitted it to find e4 still being displayed!!
Any ideas??
(I brought the old termination stat away and checked it again - it is faulty!)