View Full Version : Zanotti fz229 alarm
Matej
06-01-2014, 07:56 PM
Hello,
does any body know haw to delete alarm 5er on zanotti fz229.
my email: matej.ivencnik@gmail.com
thanks
UKengineer
07-01-2014, 09:13 PM
You could try a hammer.
Sent you a PDF file for the dfz cab control.
cadwaladr
08-01-2014, 04:09 AM
where on your body do you strike with the hammer,alarm code should trigger once customer says got this fridge unit its a zanotti?,hello hello think he has hung up!
vtmpnate
08-01-2014, 06:12 AM
That's a service interval alarm for road operation. I emailed you the manual for the control panel. I believe there are two types of control panels used. The manual is for control panels sold in 2010 onwards. I hope it's what you need.
Hello,
does any body know haw to delete alarm 5er on zanotti fz229.
my email: matej.ivencnik@gmail.com
thanks
Matej
09-01-2014, 03:22 PM
Thanks for the answer! It helped a lot!
vtmpnate
10-01-2014, 05:27 AM
You're welcome, Matej
incar
10-01-2014, 02:55 PM
Hello,
does any body know haw to delete alarm 5er on zanotti fz229.
my email: matej.ivencnik@gmail.com
thanks
what year is your zanotti?
incar
10-01-2014, 03:07 PM
Hello,
does any body know haw to delete alarm 5er on zanotti fz229.
my email: matej.ivencnik@gmail.com
thanks
Alarm 5er is SEr working hours for intervention of road maintenance.The signalling alternates with the visualization of the temperature and/or other alarms. The signalling disappears after pushing any button of the cabin command in order to activate it again after the switching off or a switching on in Stan-By mode.
You press the PRG taste for 10 sec and the modify the parameter SEr (normal is 80) in O to esclude alarm or >80 for next SERVICE ALARM.
HEllo bye....
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.