Climaveneta Chiller WRAT Problem

[install monkey]

e01 input voltage wrong- check youhave 415v accross any 2 phases- not got a manual

[dieacmarcel]

Good day
We have a Climaveneta wrat b 1002 chiller , and we are in a big problem
The chiller doesnts worrk anymore from 4 days and our ice rink it is A BIG LAND OF WATER
It shows error E001 * I think it is an electrical error
The tension we misured is 247 Volt or 427 Volt between phases .
How can I make this machine started ?
If the tension V it is too big , and the chiller stays on protection , do I have to enter a PASSCODE?
I do not have it , anybody can help me?
I saw there is a serial port in the matherboard and I think I can increase the limit of the power tension by 5% , so could it work that way?
Is is a shame to see people coming at the Ice Rink and laugh becouse there is no it , the company we bought it from dont answers the phone,and we don't have any manuals or support
Some specifications
Chiller ClimaVeneta
unit series 08.59.39.097
type WRAD/T 1002
PRODUCT YEAR 1993
REFRIGERANT R22
REFR.KG 25x2

dieacmarcel@yahoo.it

[goshen]

Hi
check parameters 3+4
you will need a password to acces.
mail me and i will send you the manual /
happy new year

[install monkey]

for some reason this thread indicates i posted the original question- please refer to post 2 :confused:

[dieacmarcel]

Hi
check parameters 3+4
you will need a password to acces.
mail me and i will send you the manual /
happy new year

HELLO CAN YOU PLEASE MAIL ME THE MANUAL OF THE CHILLER AT dieacmarcel@yahoo.it?
I need the manual very , thank you very much

[frank]

for some reason this thread indicates i posted the original question- please refer to post 2 :confused:
Ha Ha....for some reason the system has timed your post 4 minutes before the original poster..you must have been quick off the mark that night

[RusBuka]

operz.net/uploads/posts/2013-04/1365667773_file-19.gif