View Full Version : Twin rotary vs rotary compressor
kefah
07-11-2013, 07:19 PM
Hi guys
What are the differences between rotary and twin rotary compressor
I check the internet but I didn't find something
Brian_UK
07-11-2013, 10:25 PM
A twin has two rotors that's all.
A 20sec video....
http://m.youtube.com/watch?v=LqUSaquajVQ&desktop_uri=%2Fwatch%3Fv%3DLqUSaquajVQ
RusBuka
08-11-2013, 01:46 PM
http://www.aircon.ru/forum/index.php?PAGE_NAME=read&FID=17&TID=44058
two rotors and one rotor, I think
moideen
09-11-2013, 04:54 AM
Hi guys
What are the differences between rotary and twin rotary compressor
I check the internet but I didn't find something
I think your question about single screw and twin screw compressor in rotary compressor family. The twin screw type compressor consists of two mating helically grooved rotors, one male and the other female. Generally the male rotor drives the female rotor. Male rotors have lobs and female rotor has flutes or gullies. Lubrication and sealing between the rotors is obtained by injecting lubricating oil between the rotors. The oil also helps in cooling the compressor; as a result very high pressure ratios (up to 20:1) are possible without overheating the compressor. Single screw compressor consists of a single helical screw and two planet wheels or gate rotors. The helical screw is housed in a cylindrical casing with suction port at one end and discharge port at the other end. Suction and compression are obtained as the screw and gate rotors un-mesh and mesh. The high and low pressure regions in the cylinder casing are separated by the gate rotors.
kefah
09-11-2013, 06:26 AM
thank u moideen
that was very useful
Josip
09-11-2013, 08:42 AM
Hi, kefah :)
Hi guys
What are the differences between rotary and twin rotary compressor
I check the internet but I didn't find something
Here you can read something more ....
http://www.howden.com/NR/rdonlyres/74E03188-5DE7-485F-841E-A26591A7B584/0/Rotarytwinscrewcompressors.pdf
http://www.mt-online.com/januaryfebruary2008/screw-compressors-types-application-range-and-control
http://docs.lib.purdue.edu/cgi/viewcontent.cgi?article=1518&context=icec
http://www.petroassist.com/Tech%20Know/ScrewCompressors.pdf
Hope this will help a little ;)
Best regards, Josip :)
kefah
09-11-2013, 10:28 AM
thank u Josip
that was so helpful
CoolDay
11-11-2013, 05:54 PM
Kefah:
Moideen provided a good intro to single screw compressors.
Single screw compressor consists of a single helical screw and two planet wheels or gate rotors.
And here's some more information about single screw compressors:
http://www.emersonclimate.com/en-us/Brands/Vilter/Pages/inside_story_video.aspx
Warm Regards,
Sam
kefah
11-11-2013, 06:03 PM
thank u man
i reaqlly apprecite that
install monkey
23-11-2013, 01:02 PM
why the **** would we want to visit the ****ing site!!!- post something useful or **** off:mad:
[QUOTE=rite123;288928]If you want know about difference between rotary and twin rotary compressor then you
jdunc2301
23-11-2013, 05:09 PM
I log on for the first time in a while...spot this muppet and log off again
install monkey
23-11-2013, 05:18 PM
was it something i said??:p
I log on for the first time in a while...spot this muppet and log off again
jdunc2301
23-11-2013, 11:17 PM
was it something i said??:p
Your the only one I come here for sweetheart :p
kefah
04-02-2014, 06:13 PM
thank u pals
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.