code 63 thermoking

[navegator]

how can i solve error code 63 thermo king T1000R

[IRMechanik]

code 63 (engine stopped, reason unknown) is a generally unhelpful code.
Means the engine has stopped, most times this is fuel related (fuel pump, fuel solenoid) or it could be RPM sensor not reading correctly

[nicolass]

Hi
63 ENGINE STOPPED

Diagnostic Procedure
Download the ServiceWatch data logger using WinTrac. Review the data using Technician User Level to determine the conditions at the time the alarm was set. Conditions relevant to the alarm are recorded when the alarm is set and cleared. This data can be very helpful in determining the cause of the alarm.
1.
Download and inspect the ServiceWatch data logger information to determine the operating conditions that were present when the Alarm Code was set. Use the running service test mode feature to duplicate the operating conditions as required. Unit operating data is logged in ServiceWatch and the data is viewable in technician mode.
2.
Check for other Alarm Codes and proceed as indicated for each code.
3.
Perform a Pretrip Test to determine cause for shutdown.
4.
Verify the fuel level and check the fuel pump for proper operation.
5.
Check the air cleaner and intake hose for obstructions.
6.
Check the unit fuses.
7.
Check the RPM sensor for proper operation.
8.
Check Run Relay and fuel solenoid components and circuits.
9.
Check for low battery voltage.
10.
Be sure all ground connections on the master ground plate are secure.
11.
Check for a seized compressor or engine.

From my experience, I recommend to check the fuel supply because in most cases is a fuel problems (90%).