View Full Version : Where to buy tube benders for small benders with short radius
Contactor
07-09-2013, 11:39 PM
Hello
Some time back I saw someone using tube benders for the smaller pipe sizes (1/4 maybe 3/8) downwards with a very short radius about 1", ideal for small stuff and pressure switches, controls etc. They were about 150mm long.
Does anyone know where I can get any, they were the multi type?,
Rob White
08-09-2013, 01:05 AM
.
All the wholesalers stock them.
They are not hard to find
Regards
Rob
.
NiHaoMike
08-09-2013, 06:21 AM
Spring benders work really well for the smaller sizes. You do need to put them completely over the pipe (i.e. don't expect to be able to make a tight bend right on the end), so get ready with the tubing cutters to trim off the straight pieces on the ends if you need to.
monkey spanners
08-09-2013, 11:27 AM
Imperial eastman 368H will do 1/4 5/16 3/8 to 90' and the 470H will do 180' bends, available from Climate center and no doubt HRP FSW et al.
chemi-cool
08-09-2013, 03:48 PM
ebay.co.uk
Contactor
08-09-2013, 06:14 PM
Thanks, Imperial 367FH are the ones I had in mind 1/8, 3/16 and 1/4 with 14.2mm radius to centre of tube.
Should have thought of Imperial in the first place.
or try SRW, from 14 quid.
alec
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.