PDA

View Full Version : evap coils



stevo
25-02-2006, 11:17 AM
Hi ; Does anyone know of a supplier for finned evap coils, have to quote for replacing coils on a largish built in custom built salad server (bed type) no manufactures make ! cheers :)

Andy W
25-02-2006, 11:52 AM
Beehive coils make all mine, any shape and size, I also have had them made for cabinets with no data plates etc, just send the old coil as a patten or make a sketch and fax it off, I usually deal with Mark Bartram 01638 664134.

stevo
25-02-2006, 08:34 PM
Beehive coils make all mine, any shape and size, I also have had them made for cabinets with no data plates etc, just send the old coil as a patten or make a sketch and fax it off, I usually deal with Mark Bartram 01638 664134.

Thanks Andy W.......... very useful :D

afeef
26-02-2006, 08:10 AM
Hi ; Does anyone know of a supplier for finned evap coils, have to quote for replacing coils on a largish built in custom built salad server (bed type) no manufactures make ! cheers :)
hi sir
you can check these sites , i hope you can find what you are looking for
www.fincoil.fi

www.aia.se

truly
afeef:D

djbe
26-02-2006, 04:04 PM
I've used a firm called Coil Maintenance before now for a one off special. They were reasonably priced and decent to deal with.

Tel.: 023 9252 4999

Website : www.coilmaintenance.com

frank
26-02-2006, 06:18 PM
I use Heating & Cooling Coils quite a lot 02392 501431

Heres a link to their details http://www.edie.net/acrmarketplace/details.asp?cid=736

I'm not sure if they have their own web site.

stevo
27-02-2006, 06:31 PM
Thanks again chaps ! :)