kurisu
11-08-2013, 01:05 PM
Hi there,
I've got a Tekelek 425 dial thermostat (low voltage) connecting to a Brivis Advance 44 evaporative cooler, and hope to switch to thermostat with terminals R, Y, G....etc.
There are 4 wires going from the evaporative cooler to the current thermostat, as shown in http://i.imgur.com/ceBUMdw.jpg
Blue wire connects to terminal named "0V"
Green wire connects to terminal named "Control 2"
Yellow wire connects to terminal named "Control 1"
Red wire connects to terminal named "5.6V"
Does anyone knows how these translate to terminals R/Y/G..etc?
Thanks
I've got a Tekelek 425 dial thermostat (low voltage) connecting to a Brivis Advance 44 evaporative cooler, and hope to switch to thermostat with terminals R, Y, G....etc.
There are 4 wires going from the evaporative cooler to the current thermostat, as shown in http://i.imgur.com/ceBUMdw.jpg
Blue wire connects to terminal named "0V"
Green wire connects to terminal named "Control 2"
Yellow wire connects to terminal named "Control 1"
Red wire connects to terminal named "5.6V"
Does anyone knows how these translate to terminals R/Y/G..etc?
Thanks