Chris2005
23-07-2013, 05:56 PM
Hi All
I was out at a thermoking TS200 today which is intermittently bringing up code 63 and when running takes forever to bring down the temp.
The sight glass is full
High side pressure 210 psi
low side pressure 30 psi
On defrost high pressure 300 psi
after about 45 mins of running the temp goes from 16c to 11c
slight chill in suction pipe
I have a feeling the defrost valve is leaking through but not 100% sure
on the unit there is no schreddar valve before the pressure regulator
Regards
Chris
I was out at a thermoking TS200 today which is intermittently bringing up code 63 and when running takes forever to bring down the temp.
The sight glass is full
High side pressure 210 psi
low side pressure 30 psi
On defrost high pressure 300 psi
after about 45 mins of running the temp goes from 16c to 11c
slight chill in suction pipe
I have a feeling the defrost valve is leaking through but not 100% sure
on the unit there is no schreddar valve before the pressure regulator
Regards
Chris