PDA

View Full Version : Display Fridge Controller



folco
17-06-2013, 06:24 PM
Hi same problem with my display chiller cabinet.Runs all the time and temp.getting down to zero.On the programmer read out is HT.What settings should be on P1,P2,P3,P4,P5,P6 P7,P8.

folco
20-06-2013, 05:28 PM
Thanks will check the above.
Link that shows parameter settings:
http://www.carel.com/carelcom/web/download?nome_file=/carelcom/web/@extsrc/@eng/@catalogo/@documenti/@istruzioni/050004121.pdf

Programmer is a PECOMARK TTDP-20-A.Has anybody got instructions for settings etc.Cheers for replies

aircon50
02-08-2013, 04:50 PM
TTDP-20 is made as a budget 1 relay, 1 sensor controller for Pecomark by AKO. Use the same set-up parameters as an AKO-14123.
Hope this helps