Woodley Micromon probe

[Peter_1]

I have a client with a Micromon Woodley, installed around 1995.
I have a defective probe with 40 017 185 (or 188) UE D printed on it.
Does someone know this type of probe?

[Peter_1]

This is the probe. http://aawcs.co.uk/index.php?route=product/product&product_id=315 I just need the type.
They talk about a PT-2 probe.

[install monkey]

http://www.aawcs.co.uk/industrial_control_services/woodley_electronics/woodley.html
:)

[Peter_1]

Thanks IM, but when you click on Woodley probes, you get 12 probes : PT1, PT2 ,PT3 and PT100, calibrated and non-calibrated. The numbers I have on my probe doesn't match with these.

[monkey spanners]

Could you substitute the fault probe temporarily with a resistance decade box and use it to find out what the probe should read at various temperatures? (beware offsets that have been programed into the controller)

e.g.

http://www.youtube.com/watch?v=sWpu4dnpj7E

[install monkey]

AAW technical department (01635 248589) for more information.
does say danfoss has bought them out but they still offer advice/repairs

[Peter_1]

Money, there you are again with your decade box:D. Just searched on the Farnell site and ordered one.