klima
16-03-2013, 07:41 PM
Hi,
I have one problem and I need an explanation from an expert.
I have LAEIA oil cooler ( it is a component of Fanuc CNC Machine) and a compressor in that cooler is ASPERA NE9213GK for R 404 A.
I have a label with tech data on cooler and this label says R 410A-0.97 kg.
Question is: can I put R410A in that sistem, can I do any damage to compressor?
Unfortunately, I can't be sure that someone did not repair this cooler before and put this compressor in, I dont have any tech data from cooler.
Cooler is applied to cool down oil that is used to keep piece of metal on 22 C during processing on CNC machine.
Oil pump has a capacity of 10-37 lit/min, the cooler is set to keep 22 C for outgoing oil.
The temperature for ingoing oil is in range from 27 to 35 C (depending on load of CNC machine).
If you have any question I will try to answer.
Please help.
With regards,
Klima
I have one problem and I need an explanation from an expert.
I have LAEIA oil cooler ( it is a component of Fanuc CNC Machine) and a compressor in that cooler is ASPERA NE9213GK for R 404 A.
I have a label with tech data on cooler and this label says R 410A-0.97 kg.
Question is: can I put R410A in that sistem, can I do any damage to compressor?
Unfortunately, I can't be sure that someone did not repair this cooler before and put this compressor in, I dont have any tech data from cooler.
Cooler is applied to cool down oil that is used to keep piece of metal on 22 C during processing on CNC machine.
Oil pump has a capacity of 10-37 lit/min, the cooler is set to keep 22 C for outgoing oil.
The temperature for ingoing oil is in range from 27 to 35 C (depending on load of CNC machine).
If you have any question I will try to answer.
Please help.
With regards,
Klima