PDA

View Full Version : Mitsubishi Heavy Oil MGO-X



Ian21081974
15-02-2013, 11:53 AM
Hi

I have had to look at a Mitsubishi Heavy Vrf GHCP560HMTE4
Its a gas heat pump air conditioner with a engine in it.
We have a E88 fault on the system which is a low level oil alarm for the engine and i need to top it up to get the system running again.
Does anyone know what properties the Mitsubishi Heavy Oil is what ratings.
MGO-X oil ?????????????????

Ian

install monkey
15-02-2013, 08:47 PM
toyota engine? like the sanyo's- drain ur van,or stick some 15/30 in it!
check the run hours as it may be due for a service

Ian21081974
15-02-2013, 09:17 PM
Hi
Many thanks much appreciated.

ian

install monkey
15-02-2013, 09:30 PM
dug out a manual- scrolled through pages and not much info on oil type- but for ref its a 2.2ltr - cant u syphon some oil out of a nearby system??
http://www.mediafire.com/view/?zgs88ndnol881tf

Ian21081974
15-02-2013, 09:33 PM
Hi I can't really syphon any out don't want to make matters worst.
but anymore info is much appreciated.

ian

Ian21081974
15-02-2013, 09:35 PM
By the way thanks for the manual brilliant.

ian

install monkey
15-02-2013, 09:38 PM
invoice in the post! haha- does say e88 can be run hrs as well as oil low- check run hrs as u might need oil filter, but u need to be gas safe,a mechanic,and prob fgas too!!- last resort tilt the outdoor till the oil level makes contact- ps theyre about 700kg! haha

By the way thanks for the manual brilliant.

ian

RusBuka
17-02-2013, 07:48 PM
del, it was manual.

Ian21081974
21-02-2013, 09:54 AM
Mitsubishi Heavy Oil MGO-X
Hi
Does anyone know where you can purchase this oil or a similar oil i dont know the properties of the oil i need to get these units up and running temporary.
Any info please.
Ian

Ian21081974
21-02-2013, 09:08 PM
HI

found out today hrp sell the oil and a engine service kit if anyone is interested.

ian