View Full Version : transicold freezer help needed
rcac101
07-02-2013, 01:24 PM
Hey guys, My client has a transicold freezer container. 15 amp fuse was blown i replaced it just to watch the board fry. But the fuse that was on the board was wrong to start with a 10 amp is what it should be.I will pick up a new board today with all the right fuses. as i get my parts together, 1500+ for board, i am terrified once i start up system the control module will fry :eek any direction would be great.
TY
Roger
reefermechanic
07-02-2013, 02:26 PM
Hey guys, My client has a transicold freezer container. 15 amp fuse was blown i replaced it just to watch the board fry. But the fuse that was on the board was wrong to start with a 10 amp is what it should be.I will pick up a new board today with all the right fuses. as i get my parts together, 1500+ for board, i am terrified once i start up system the control module will fry :eek any direction would be great.
TY
Roger
Hi Roger,
Sorry but you mean 15 amp fuse burning continuously when first work the reefer unit?
see you
reefermechanic.
rcac101
07-02-2013, 03:36 PM
yeah , gotta be a short somewhere got any suggestions?
reefermechanic
07-02-2013, 03:44 PM
yeah , gotta be a short somewhere got any suggestions?
rcac
If you are in the proper state that we can chat via Yahoo
reefermechanic@yahoo.com
see you
reefer mechanic
reefermechanic
08-02-2013, 11:31 PM
hi rcac
did you find the problem?
see you
reefermechanic
waterskidog
10-02-2013, 12:56 AM
Reefermechanic, does it matter what unit model number?
reefermechanic
10-02-2013, 09:08 AM
Reefermechanic, does it matter what unit model number?
Hi waterskidog
yes...
see you
reefermechanic.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.