jeff_gm
09-12-2012, 02:42 AM
Dear all,
I had a problem with Mitsubishi Elect PL-5 Non Inverter A/C but no error code.
At first cannot ON at all, change all the sensor then system can run for 5 min
and the air is cool with pressure check at 70 PSI and 250PSI and compressor run with specification. But after that it just stop running.
Do anyone have the manual or know what wrong with this?
The only thing I can think the indoor and outdoor PCB.
Thanks
I had a problem with Mitsubishi Elect PL-5 Non Inverter A/C but no error code.
At first cannot ON at all, change all the sensor then system can run for 5 min
and the air is cool with pressure check at 70 PSI and 250PSI and compressor run with specification. But after that it just stop running.
Do anyone have the manual or know what wrong with this?
The only thing I can think the indoor and outdoor PCB.
Thanks