PDA

View Full Version : Tecnodom blast chiller


kencra34
07-11-2012, 04:13 PM
Im looking to find probes for the tecnodom 6 rack blastchiller? any ideas please:)
Brian_UK
07-11-2012, 11:08 PM
Do you have a model number for it?
kencra34
08-11-2012, 05:01 PM
I sure do ,its Model -ABB/SURGE.CERV.5TY08
Sel-1/13167710 ... Code 649005
I'm looking for the air probe sensor not the probe for the product , the reading from it is about 100 degrees c , so im hoping the probe is the problem not the board but ive no way of testing it , if you can help that would be great
Thanks again
Brian_UK
08-11-2012, 11:06 PM
Can't find your model number of their website but reading what brochures they have it seems their "sonda camera" probes are normally PTC type. However if you have an Eliwell controller fitted it might be an NTC type probe.

Either way it's one or the other, 50% chance ? ;)