Skexis
19-10-2012, 04:08 AM
Hi
A friend has asked me to remove an old Daikin split from a house he has just bought. The plan was to pump down, remove and sell the unit. Problem is the remote control is nowhere to be found and a new one will cost around AUD$115. Is there a way of getting the thing to run without the remote? The button on the front lower right works in as much as power is supplied to the unit and the louvres open however I can't see how to get the compressor going. We've tried warming up the area around the indoor unit by using heat guns (not directly onto the unit) but nothing happens.
Indoor unit is a FTXD60BVMA. Outdoor unit is a RXD60BVMA.
I have the Daikin service manual that covers these however can't see anything that might help.
Thanks
A friend has asked me to remove an old Daikin split from a house he has just bought. The plan was to pump down, remove and sell the unit. Problem is the remote control is nowhere to be found and a new one will cost around AUD$115. Is there a way of getting the thing to run without the remote? The button on the front lower right works in as much as power is supplied to the unit and the louvres open however I can't see how to get the compressor going. We've tried warming up the area around the indoor unit by using heat guns (not directly onto the unit) but nothing happens.
Indoor unit is a FTXD60BVMA. Outdoor unit is a RXD60BVMA.
I have the Daikin service manual that covers these however can't see anything that might help.
Thanks