PDA

View Full Version : Hotpoint FFP187BP not getting cold enough



moss99
16-10-2012, 08:44 PM
Hi all I have a hotpoint FFP 187BP which does not get cold enough the compressor and fan run constantly the evaporator only gets frost on the top rung (see photo ) this makes me think it is a low gas problem but i can see no signs of any damage anywhere , is there any way i can confirm this for certain before i bin the fridge , its only a couple years old ..
9644
thanks ..

norcool
16-10-2012, 09:58 PM
hei,i believe you have to low pressure lo-pressure side.
defective thermostatic valve,filter problem and its shore that you dont have enough liquid input to the evaporator.
At last it cold be defect valves in the compr.You to check LP and HP.

tonto33
17-10-2012, 01:22 PM
short of gas

moss99
17-10-2012, 06:37 PM
thats what i was thinking so its a write off then really ..

tonto33
17-10-2012, 09:02 PM
nope can be re-gassed where bouts are you

moss99
17-10-2012, 09:27 PM
im down in cornwall .. ive been looking at re gas gauges . but im thinking if i got a leak somewhere its a waste of time to regas .

tonto33
17-10-2012, 10:25 PM
just came back from newquay:D try http://www.kitchenkitsw.com/ in Truro